Professional Gate Installation in Wichita, KS

Gate costs in Wichita depend on the type, material, and size. A standard wood walk gate typically runs $200–$500 installed. Double drive gates range from $500–$1,500 depending on material and width. Wrought iron driveway gates start around $1,500–$3,500, and automatic gate systems (including the opener) can range from $2,000–$5,000+. Every Midwest Fence estimate is free and includes all materials, labor, and hardware — no hidden fees.

A sagging gate is usually caused by loose or worn hinges, a leaning post, or a gate frame that’s gone out of square. For a quick fix, try tightening the hinge screws or adding a diagonal brace (anti-sag kit) from the bottom hinge corner to the top latch corner. If the post itself is leaning, it likely needs to be reset in concrete — that’s a job for a professional. Contact us for a free repair estimate if your gate is dragging or won’t close properly.

In most cases, a standard fence gate (under 6 feet tall in the backyard or under 4 feet in the front yard) does not require a separate permit in Wichita. However, automated driveway gates and gates on commercial properties may require electrical permits. If your HOA has fence and gate guidelines, you’ll want to check those before installation. We help navigate permits and HOA requirements on every project.

For a standard residential driveway, a double drive gate 10–12 feet wide works for most vehicles. If you need to fit trucks, trailers, RVs, or equipment, go with 14–16 feet. Commercial entrances typically start at 16–20 feet. Single swing gates work for openings up to about 12 feet; anything wider should be a double drive or sliding gate. During your free estimate, we’ll measure the opening and recommend the right size for your specific needs.

In most cases, yes. If your existing gate and posts are structurally sound, we can retrofit an automatic opener onto it. Swing gates use arm-style operators, and sliding gates use rail-mounted drive systems. We’ll assess the gate weight, condition, and electrical access during a free on-site evaluation. Access controls like keypads, remotes, and smartphone integration can be added at the same time.

A standard walk gate or single swing gate can be installed in 2–4 hours. Double drive gates typically take half a day. Sliding gates and cantilever systems may require a full day, especially if concrete footings are needed. Automatic gate installations — including the opener, wiring, and access controls — usually add an additional half day. If the gate is part of a full fence installation, it’s built and hung as part of the same project.